Reolink RLN16-410 Operational Instruction

6English5 English
Set up PoE NVR System
A setup wizard will guide you through the NVR system configuration process. Please set a
password for your NVR (for the initial access) and follow the wizard to configure the system.
Connect cameras to PoE ports on
the NVR.
Connect the NVR to a power outlet
and turn on power switch.
NOTE: The password should be at least 6 characters. It is recommended that you note down the
password and keep it in a secure place.
NOTE: Some Reolink WiFi cameras also work with Reolink PoE NVR. For more information, visit
https://support.reolink.com and search Make Reolink WiFi Cameras Work with Reolink PoE-NVRs.
Access the NVR via Smartphone or PC
Download and launch the Reolink App or Client software and follow the instructions to access the
NVR.
Reset Button
DC Power
Network (LAN)
3
4
• On PC
Download path: Go to https://reolink.com > Support > App & Client.
• On Smartphone
Scan to download the Reolink App.

Reolink RLN16-410 Specifications

General

Number of users	20 user(s)
Maximum resolution	1920 x 1080 pixels
Video input channels	16 channels
Supported resolutions	1024x768, 1280x720, 1280x800, 1280x1024, 1440x900, 1920x1080
Operating system installed	Embedded LINUX
Product color	Black
eSATA ports quantity	1
USB 2.0 ports quantity	2
Ethernet LAN data rates	1000 Mbit/s
Power over Ethernet (PoE)	Yes
Ethernet LAN (RJ-45) ports	17
Supported network protocols	HTTP, HTTPS, TCP/IP, UDP, DHCP, P2P, UPNP, RTSP, SMTP, SSL/TLS, DNS, DDNS, NTP, FTP
HDD interface	Serial ATA
Maximum storage capacity	12 TB
Total installed storage capacity	3000 GB
Mobile operating systems supported	Android, iOS
Output current	2.5 A
Output voltage	48 V
AC input voltage	100-240 V
Power consumption (typical)	20 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Cables included	HDMI, LAN (RJ-45)
Wi-Fi	No

Weight and Dimensions

Depth	260 mm
Width	330 mm
Height	45 mm
Weight	3000 g