ResMed Swift FX User Manual

5
English
Technical specifications
Pressure–flow
curve
The mask contains passive venting to protect against
rebreathing. As a result of manufacturing variations,
the vent flow rate may vary.
Dead space
information
Physical dead space is the empty volume of the mask
to the end of the swivel. Using the large cushions it
is 106 mL.
Therapy pressure 4 to 20 cm H
2
O
Resistance Drop in pressure measured (nominal)
at 50 L/min: 0.4 cm H
2
O
at 100 L/min: 1.4 cm H
2
O
Environmental
conditions
Operating temperature: +41°F to 104°F
(+5°C to +40°C)
Operating humidity: 15% to 95% relative humidity
non-condensing
Storage and transport temperature: -4°F to 140°F
( -20°C to +60°C)
Storage and transport humidity: up to 95% relative
humidity non-condensing
Gross dimensions Large: 16.34“ (H) x 3.70“ (W) x 1.77“ (D)
(415 mm (H) x 94 mm (W) x 45mm (D))
Mask fully assembled with short tube assembly – no
headgear.
Mask setting
options
For S9: Select ‘Pillows’
For other devices: Select ‘SWIFT’, (if available),
otherwise select ‘MIRAGE’ as the mask option.
0
10
20
30
40
50
60
4 6 8 10 12 14 16 18 20
Mask pressure (cm H
2
O)
Vent flow rate (L/min)
Pressure
(cm H
2
O)
Flow
(L/min)
4 20
8 29
12 37
16 43
20 49

ResMed Swift FX Specifications

General

Brand	ResMed
Model	Swift FX
Category	Medical Equipment
Language	English