Rheem 27 874 Series User Manual

TEMPERATURE CONTROL – DELUXE
35
Turning Off Bath Fill Mode During Its Operation
The bath fill operation can be interrupted by pressing the BATH FILL button before completion of the bath fill
operation.
If it is necessary to turn off the Bath Fill mode before the operation is complete, during Step 7:
• Press the BATH FILL button
At this first press of the BATH FILL button
 Water flow from the hot tap will cease
 The operating light will go out
 The bath fill water volume display panel will show
0 litres.
 The temperature display will go blank
 The bath fill operating light will flash
 The voice prompt will sound
“bath filling has been stopped, please turn off the hot
water tap and press the BATH FILL button to finish”
• Close the hot tap
• Press the BATH FILL button again
At this second press of the BATH FILL button
 The bath fill operating light and bath fill indicator light
will go out
 The bath fill water volume display will go blank
 Note: If the hot tap has not been turned off, the voice
prompt will sound
“please ensure the bath hot water tap is turned off”
“bath filling has been stopped,
p
lease turn off the hot water tap
and press the
BATH FILL button to finish”
BATHFILL
BATH(l)
40
°C
0
A
CTIVE
ON/OFF

BATHFILL
BATH(l)
40
°C
0
ACTIVE
ON/OFF
“please ensure the bath hot
water tap is turned off”
BATH(l)
40
°C
0
A
CTIVE
ON/OFFBATHFILL

Rheem 27 874 Series Specifications

General

Brand	Rheem
Model	27 874 Series
Category	Water Heater
Language	English