FORM NO. G11-502 REV. 1
Supersedes Form No. G11-502
GAS FURNACES
RGTC- SERIES
Models with Input Rates
from 45,000 to 105,000 BTU/HR
[13.19 to 30.77 kW]
(All Models up to 95% A.F.U.E.✝)
CLASSIC
®
90 PLUS
95% A.F.U.E.
DOWNFLOW/
HORIZONTAL
GAS FURNACES
The Rheem Classic
®
90 Plus High Efficiency line of down-
flow/horizontal gas furnaces are designed for utility rooms,
closets, alcoves, attics or crawl spaces. The RGTC is
shipped in the downflow configuration and is easily con-
verted for horizontal left-hand airflow applications.
The design is certified by CSA.
Features
■ Heat exchanger is constructed of all stainless steel for
maximum corrosion resistance and thermal fatigue
reliability.
■ Low profile “34 inch” design is lighter and easier to han-
dle and leaves room for optional accessories.
■ Top electrical connections, left or right gas and conden-
sate drainage connections on downflow models.
■ Condensate drain for horizontal application provided
standard.
■ Integrated control board manages all operational func-
tions and provides hookups for humidifier and electronic
air cleaner.
■ An insulated blower compartment, a slow-opening gas
valve and a specially designed inducer system make it
one of the quietest furnaces on the market today.
■ Pre-paint galvanized steel cabinet.
■ Molded permanent filters.
■ Optional indoor or outdoor combustion air.
■ Transformer and control fuse protection.
■ Control board diagnostics.
A variety of cooling coils and plenums designed to use with
the Classic
®
90 Plus gas furnaces are available as optional
accessories for air conditioning models.
✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with Department
of Energy test procedures.
“Visit www.Rheem.com
for complete details.”
To Next Page
Need help?
General