Rheem Classic Plus Series User Manual

28
Air
Safety Devices
RP17**H Series
Safety Devices
Type of Protection Protection From
Model
RP1724HJVXA RP1730HJVXA
Circuit protection
Current fuse (filter PCB) 250 V, 5 A x 2
Current fuse (main PCB) 250 V, 3.15 A x 2
Fan motor protection Thermal protection
Activate
302
+
27
-18
°F (150
+
15
-10
°C)
Fan motor stop
Reset
248
+
27
-18
°F (120
+
15
-10
°C)
Fan motor restart
Compressor protection
Thermal protection program
(Compressor temp.)
Activate
226°F (108°C)
Compressor stop
Reset
176°F (80°C)
Compressor restart
Thermal protection program
(Discharge temp.) (Cool or Dry mode)
Activate
230°F (110°C)
Compressor stop
Reset
After 7 minutes
Compressor restart
Thermal protection program (Outdoor temp.)
Activate —
Reset —
High pressure protection Pressure switch
Activate
4.2
±
0.1 MPa
Compressor stop
Reset
3.2
±
0.15 MPa
Compressor restart
Type of Protection Protection From
Model
RP1736HJVXA RP1748HJVXA
Fuse (Filter PCB)
AC 250 V, 5 A
AC 250 V, 10 A x 2
Protector (Filter PCB) AC 500 V, 45 A
Fuse (MAIN PCB) AC 250 V, 3.15 A x 2
Fuse (INV PCB) AC/DC 400 V, 5 A
Fan motor protection Thermal protection
Activate
239
±
27°F (115
±
15°C)
Fan motor stop
Reset
158°F (70°C)
Fan motor restart
Compressor protector
Over current protection —
Temperature protection
Activate
226.4°F (108°C)
Compressor stop
Reset
176°F (80°C)
Compressor restart
Thermal protection program (Discharge temp.)
Activate
230°F (110°C)
Compressor stop
Reset
After 3 minutes and 230°F (110°C) less than
Compressor restart
High pressure protection
Activate 580 psi (4.0 MPa)
Reset 471 psi (3.25 MPa)

Rheem Classic Plus Series Specifications

General

Brand	Rheem
Model	Classic Plus Series
Category	Water Pump
Language	English