Rheem Gladiator User Manual

14
Programming the Electronic Control
Setting the Water Temperature
Changing The Water Temperature
or
115°F 125°F
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
CLEAR
ALARM
VACATION 110
UNLOCK/LOCK
120
(3 SEC)
130 140 150
WiFi
SETUP
SERVICE NEEDED
SET POINT (°F)
When power is applied, the
water heater will be in a
Disabled mode. This means that
the water heater is not heating
the water and only the power
LED is illuminated. Press the
RIGHT arrow until the desired
temperature is shown.
Reduce Water Temperature:
Press LEFT arrow until the
desired temperature is shown.
Increase Water Temperature:
Press RIGHT arrow until the
desired temperature is shown.
NOTE: A change in
temperature is in increments
of 5°F unless the Rheem
EcoNet® app is used.
DANGER: Hotter water
increases the potential for Hot
Water SCALDS.

Rheem Gladiator Specifications

General

Brand	Rheem
Model	Gladiator
Category	Water Heater
Language	English