63
Recirculation Pump Control
Recirculation Operation –
On-Demand mode-
If the On-Demand mode is used, the water heater
needs wifi capability.
If the water heater is NOT a WiFi model, you
cannot use the On-Demand mode.
To enter On Demand Mode
• Ensure Switch 1 on DIP 2 and switch 4 on DIP
1 are off.
• In less than one minute.
• Turn Switch 1 on DIP 2 on-off-on-off.
• Press the Adjust Button
• The LED will flash one time
The unit is now in on demand mode.
NOTE:
If the water heater does not have WiFi
capability, the built-in display needs to
be replaced to the display including wifi
capability.
Rheem offers the display including wifi capability.
See the Parts and Accessories catalog for more
information.
When set to On-Demand mode, the recirculation
pump is ON for 5 minutes when the water heater
receive the signal form the application on smart
phone.
Mode setting – On-Demand mode-
Please refer to the instruction of WiFi display
section.
Recirculation Operation – Schedule
mode-
If the Schedule mode is used, the water heater
needs wifi capability.
If the water heater is NOT a WiFi model, you
cannot use the Schedule mode.
NOTE:
If the water heater does not have WiFi
capability, the built-in display needs to
be replaced to the display including wifi
capability.
Rheem offers the display including WiFi capability.
See the Parts and Accessories catalog for more
information.
When set to Schedule mode, the recirculation
pump is ON according the setting schedule on the
application on smart phone
Mode setting – Timer mode-
To use Schedule mode, the water heater should be
set to Performance mode or Timer mode.
USING YOUR WATER HEATER
To Next Page
Loading...
Need help?
General
