Other Print Operations
122
3
Rotating collate
Every other print set is rotated by 90 degrees.
Important
❒ The Rotating Collate function requires two paper trays containing same size
paper but in different orientations.
❒ If the output tray has shift function, Shift Collate will be applied even if Ro-
tating Collate is selected.
❖ When Rotating Collate is cancelled
If the following functions are selected, Collate or Shift Collate will be applied
even if Rotating Collate is selected:
• When combined with the staple function.
• If jobs containing pages of various sizes are set.
• When output tray is specified.
• When combined with the covers function.
• When combined with the slip sheet function.
• When combined with the chaptering function.
• If custom size paper is set.
Note
❒ When Rotating Collate has been selected, printing speed will be slower than
with other collate functions.
Shift Collate
The optional finisher is required for this function.
The finisher's shift tray moves backward or forward when a job is output, and
then it shifts to output the next set. Therefore, copies can be separated into per
set at a glance.
AEU017S
AEU018S
To Next Page
Loading...
Need help?
General
