Using the Document Feeder
Place Documents in the feeder
Adjust Document guide for the size of document in
feeder. Make the guide is snug and not tight to avoid
jams.
Using the Document Feeder
Do not use the following types of paper:
-Bent, folded, or creased paper
-Curled or twisted paper
-Wet paper
-Paper whose weight is heavier or lighter than the
limitation
-Perforated paper
-Adhesive label paper on which glue or base paper
is exposed
-Paper with clips or staples
Keep loose objects away from document feeder as
these will cause damage and equipment failure.
Do not exceed paper limit guide
This will cause jamming
To Next Page
Loading...
Need help?
General