4
Handling Power Cords and Power Plugs
R WARNING:
R CAUTION:
• The supplied power cord is for use with this equipment only. Do not
use with other appliances. Doing so may result in fire, electric shock,
or injury.
• Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.
• If the power cord is damaged (exposure of the core, disconnection,
etc.), contact your service representative to change to a new one. Op-
erating the machine with a damaged power cord may cause an electric
shock or fire.
• It is dangerous to handle the plug with wet hands. Doing this may re-
sult in receiving an electric shock.
• Confirm the wall outlet is near the machine and freely accessible, so
that in the event of emergency, it can be unplugged easily.
• Avoid connecting multiple devices including this printer to the same
power source.
• Connect the machine only to the power source described in "Informa-
tion" in the HTML manual or "Safety Information" (the printed manu-
al). Connect the power cord directly into a wall outlet and do not use
an extension cord.
• Power cords that are damaged, broken, modified, trapped under
heavy objects, pulled hard, or bent severely are electric shock and fire
hazards.
• To disconnect the power cord, pull it out by plug. Do not drag the cord itself.
Doing so may result in damage to the cord, leading to fire or electric shock.
• For safety reason, unplug the power cord from the wall outlet if the machine
will not be used for an extended period of time such as holidays.
To Next Page
Loading...
Need help?
General