72
Using the Fn (Function) Button
2
Locking the focus at the focus lock position --------------------------------------
You can press the Fn button to switch AF/MF and lock the focus at the focus lock position
(AF Lock). Use the following operating procedure.
1 With the camera set to auto focus, half-press the shutter release button to focus on
the subject. (Focus Lock)
2 Release the shutter release button and press the Fn button.
• The camera is set to MF and the shooting distance is fixed at the focus lock
position.
• To return to auto focus mode, press the Fn button again.
Assigning [AF/Snap] to the Fn (Function) button (GP.169) and
then pressing the Fn button during shooting allows you to switch
between auto focus (AF) and Snap. Pressing the Fn button
switches the focus mode depending on the [Focus] setting on the
shooting menu (GP.99), as shown below.
* The last selected AF mode is selected.
1
Set [Set Fn Button] to [AF/Snap] on the setup menu.
• For the operating procedure, see P.169.
2
With the camera ready to
shoot, press the Fn button.
• When the focus mode changes to
snap mode, the symbol appears at
the upper right of the screen.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Multi-trgt AF], [MF] or [A] (GP.99), pressing the Fn button
does not switch between AF and Snap.
Note ----------------------------------------------------------------------------------------------
You can also use the shooting menu to make the [Focus] setting. (GP.99)
AF/Snap
[Focus] setting Press the Fn button
Multi AF Switches between [Snap] and [Multi AF].
Spot AF Switches between [Snap] and [Spot AF].
Snap Switches between [Multi AF]
*
/[Spot AF]
*
and [Snap].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
