First-time user? read this.
18
Turning the Power On and O
Shooting Mode
Slide the power switch to ON to
turn the camera on. The camera
will play the start-up sound. The
autofocus/ash lamp blinks for
several seconds while the camera
starts up.
To turn the camera o, slide the
power switch to OFF. The number
of pictures taken so far that day
will be displayed before the
camera turns o (zero is displayed
if the camera clock has not
been set; if you turn the camera o after changing the
clock (page 20), the camera will display the number of
pictures taken after the clock setting was changed).
Caution
Changes to continuous (page 73), interval (page 83), and self-
timer (page 31) settings are lost when the camera is turned
o. Turning the camera o restores settings for MY modes to
the values saved with Reg. My Settings. Other settings are
unaected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
