To Next Page
M
Michael WilliamsSep 18, 2025
How to prevent paper bending on Ricoh MP C3004?
- WwaynesnowSep 18, 2025
If paper is bent when ejected from the finisher upper tray of your Ricoh All in One Printer, change the output tray to the finisher shift tray.
How to prevent paper bending on Ricoh MP C3004?
If paper is bent when ejected from the finisher upper tray of your Ricoh All in One Printer, change the output tray to the finisher shift tray.
What to do if Ricoh All in One Printer shows an error?
If your Ricoh All in One Printer displays an error, it indicates that a function in the [Check Status] screen has a defect. To resolve this, press [Check] for the function with the error, read the displayed message, and take the recommended action. You can continue using other functions normally.
Why does my Ricoh All in One Printer frequently misfeed?
If your Ricoh All in One Printer frequently misfeeds, and you're using curled paper, straighten the paper or load it upside down so the curled edges face downward. Ensure the cut paper is stored flat to prevent curling.
How to fix frequent misfeeds on Ricoh MP C3004?
If your Ricoh All in One Printer frequently misfeeds, it may be due to improperly set tray side or end fences. Remove the misfed paper and check that the side and end fences are correctly set and locked.
What causes frequent misfeeds in Ricoh All in One Printer?
If your Ricoh All in One Printer frequently misfeeds, it may be because paper of undetectable size has been loaded. Remove the misfed paper. If the paper size isn't automatically selected, specify the paper size using the control panel.
Why Address Book change causes error on Ricoh MP C3004 All in One Printer?
If an error occurs when the Address Book is changed from the display panel or Web Image Monitor on your Ricoh All in One Printer, it is because the Address Book cannot be changed while you delete the multiple stored documents. Wait a while, and then retry the operation.
What to do if Ricoh MP C3004 does not turn off?
If your Ricoh All in One Printer does not turn off 7 minutes after the main power is turned off, the machine cannot perform the shutdown procedure. Repeat the shutdown procedure. If the machine still does not turn off, contact your service representative.
Why does Ricoh MP C3004 All in One Printer print on the reverse side?
If images are printed on the reverse side of the paper by your Ricoh All in One Printer, you may have loaded the paper incorrectly. Load the paper correctly.
How to enable duplex printing on Ricoh MP C3004?
If your Ricoh All in One Printer does not print in duplex mode, it may be because the selected paper type is unsuitable for duplex printing. In "Tray Paper Settings", choose a paper type that supports duplex printing.
How to turn on display on Ricoh MP C3004 All in One Printer?
If your Ricoh All in One Printer display is turned off, it is likely in Sleep mode. Touch the display panel to wake it.
General| Resolution | 1200 x 1200 dpi |
|---|---|
| Duplex Printing | Yes |
| Monthly Duty Cycle | 150, 000 pages |
| Type | Color Laser Multifunction Printer |
| Functions | Print, Copy, Scan, Fax (optional) |
| Print Technology | Laser |
| ADF Capacity | 100 sheets |
| Print Speed | 30 pages per minute |
| Maximum Paper Capacity | 4, 700 sheets |
| Connectivity | USB, Ethernet, Wi-Fi |
| Scan Resolution | 600 dpi |
| Operating System Compatibility | Windows, macOS, Linux |
| Scan Speed | 80 images per minute |
