Message Explanation Recommended Action
Toner Set Error: # The indicated print cartridge is
not installed correctly, or not
installed.
Install the indicated print
cartridge correctly.
The error message appears
even though the print cartridge
is installed correctly.
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Fusing Unit Set Error The fusing unit is not installed or
not installed correctly.
Install the fusing unit correctly.
Print Cartridge: Not Set The waste toner bottle is not
installed or not installed
correctly.
Install the waste toner bottle
correctly.
If the error message appears
even though the waste toner
bottle is attached correctly,
contact your service
representative.
ServiceCall - SCXXX There is a problem with the
printer's controller.
Turn off the main power, and
then turn it on again.
If the error occurs again,
contact your sales or service
representative.
Density Sensor Require
Cleaning
Color registration failed. Clean the toner density sensor.
See page 138 "Cleaning the
Toner Density Sensor".
7. Troubleshooting
152