WARNING: Do not put any
object into ventilation openings.
Do not vacuum with any ventilation
openings blocked; keep free of dust,
lint, hair or anything that may reduce
air flow.
!
Accessory Storage
1. The Extension Wands and other
Accessories can be stored by placing
them over the Posts on the Four Caster
Feet.
2. To remove, twist and pull up on the
Extension Wand or Accessory.
3. Snap additional Accessories onto the
Accessory Caddy.
ACCESSORY & HOSE STORAGE
Caster Feet Posts (4)
Caster Feet (4)
D
R
A
I
N
D
R
A
I
N
Accessories
Accessory
Caddy
Accessories
Hose Storage
The Tug-A-Long Positive Locking Hose
with Dual-Flex may be stored around the
Powerhead Assembly by tucking it between
the Motor Housing and Hose Clips.
Powerhead Carry
Handle/Cord Wrap
Cord Clip
Cord & Plug
Assembly
Tug-A-Long Positive
Locking Hose with
Dual-Flex
Hose Storage Clips (2)
Cord Storage
To store the Cord, wrap it around the
Powerhead Carry Handle / Cord Wrap
beneath the two Tabs. Secure the Cord
using the Cord Clip on the Plug.
CAUTION: Do not operate vacuum
while the hose is still wrapped
around the powerhead assembly in
the storage position.
!
13
To Next Page
Loading...
Need help?
General
