Rigol DS1102D Quick Guide

RIGOL
Quick Guide for DS1000E, DS1000D Series
3
How to Connect Probe or BNC
1． Connect the probe
As shown in the above figures, set the attenuation switch on the
probe to 10X and connect the probe to Channel 1 on the
oscilloscope, push and rotate clockwise to lock the probe in place.
If your probe is a new one, or it is the first time you connect to the
oscilloscope, before use it, please do the following compensation
operation:

Rigol DS1102D Specifications

General

Brand	Rigol
Model	DS1102D
Category	Test Equipment
Language	English