Rigol MSO7000 Series User Manual

Chapter 1 Quick Start RIGOL
MSO7000/DS7000 User Guide 1-19
Single
Press this key to set the trigger mode to "Single".
Multifunction knob
 Non-menu Operation:
In non-menu-operation mode, rotate this knob to adjust the brightness of
waveform display. The settable screen brightness ranges from 1% to 100%.
Turn it clockwise to increase the brightness, and turn it counterclockwise to
decrease the brightness. Press Display  Intensity to adjust the waveform
brightness. You can also use the knob to adjust it.
 Menu Operation:
When you operate on the menu, the backlight of the knob is illuminated. For the
menu item that has multiple parameters under it, when you press the menu
softkey, rotate the knob to select the parameter item, then press down the knob
to select it (sometimes, the specified parameter item can be selected by rotating
the knob). The knob can also be used to modify parameters, input the filename,
etc.

Rigol MSO7000 Series Specifications

General

Brand	Rigol
Model	MSO7000 Series
Category	Test Equipment
Language	English