Rockwell Automation Allen-Bradley ControlLogix EtherNet/IP User Manual

Rockwell Automation Publication 1756-UM004A-EN-P - March 2019 17
Chapter 2
Connect to the EtherNet/IP Network
EtherNet/IP™ networks are communication networks that offer a
comprehensive suite of messages and services for many automation
applications.
The following are examples of applications that use EtherNet/IP networks:
•Real-Time Control
• Time Synchronization
•Motion
This open network standard uses commonly available Ethernet
communication products to support real-time I/O messaging, information
exchange, and general messaging.
EtherNet/IP networks also support CIP Safety™, which makes the
simultaneous transmission of safety and standard control data and diagnostics
information over a common network possible.
Topic Page
Set the IP Address 18
Set the IP Address with Rotary Switches 18
Other Methods to Set the IP Address 19
Reset the Module IP Address to Factory Default Value 19

Rockwell Automation Allen-Bradley ControlLogix EtherNet/IP Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley ControlLogix EtherNet/IP
Category	Network Hardware
Language	English