Installation Instructions
POINT I/O Field Potential
Distributor Modules
Catalog Numbers 1734-FPD, 1734-FPDK, Series B
Catalog numbers with the suffix ‘K’ are conformal coated and their specifications are the
same as non-conformal coated catalogs.
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Prevent Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 5
Before You Begin 7
Install the Module 8
Remove the Module 9
Replace the Module 9
Wire the Module 10
Specifications 13
To Next Page
Need help?
General
