Roland D-50 User Manual

TONE PARAMETERS
@Bender Mode
This selects how the pitch is controlled by the bender lever as
follows,
c. WG Waveform [Display 28)
(Example}
if the Bender renge is set to 12 (1 octave),
and the Key Follow (Pitch) of WG is set
to 2, the maximum pitch change caused by
moving the Bender lever is 2 octaves. When
the Key Follow (Pitch) of WG is set to
zero, there is no pitch change caused by the
Bender lever.
No pitch alteration by moving the
Lever right or the left. :
Pitch changes within the Bender
range, set in Patch Factors, plus
Key Follow (Pitch) of WG. (See the
example shown right.)
Pitch changes within the Bender
range, set in Patch Factors.
I-ii Us Strei 1111 Part-1 WG Form
WaveSAls PCM O15 taka
PCM Name
Waveform
PCM
Wave
Number
@ Waveform
This selects the waveform of the synthesizer sound generator.
*A sawtooth waveform is produced by processing a square waveform
at the TVF, that is, all the waveforms are square at WG even when
a@ sawtooth is selected.
@PCM Wave Number
This selects one of the 100 different sampled waves of the PCM
sound generator. Each sample is named (PCM name) as shown on
the next page:
33

Roland D-50 Specifications

General

Synthesis Type	Linear Arithmetic (LA)
Polyphony	16 voices
Effects	Chorus, Reverb
Keyboard	61 keys
MIDI	In, Out, Thru
Release Year	1987
Filter	Digital Filter
Memory	64 patches
Outputs	Stereo, Headphones
Type	Digital Synthesizer