9
Introduction
1.
Press the top panel power button once again to turn off the
power.
If you’ve connected the E-09 to a keyboard amp or audio amp,
switch off the power to your amp before you switch off the E-
09’s power.
All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a violation
of applicable laws.
No data for the music that is played will be output from MIDI
OUT.
1.
Simultaneously press [MUSIC ASSISTANT] and [STYLE] so
both buttons are lit.
2.
Turn the VOLUME knob to adjust the volume.
3.
Press [START/STOP] so it’s lit.
The demo song starts playing.
4.
Press [START/STOP] so it goes out.
The demo song stops playing.
1.
Press [FUNCTION] so it’s lit.
2.
Use FAMILY [ ][ ] to access the “UTILITY” screen.
3.
Use SELECT [ ][ ] to access the “LCD Contrast”
screen.
4.
Use TEMPO [ (-)][ (+)] to adjust the contrast of the
characters in the screen.
5.
Press [FUNCTION] so it goes out.
Alternatively, you can adjust the display’s contrast by holding
down [NUMERIC] and using TEMPO [ (-)][ (+)].
1.
Press [FUNCTION] so it’s lit.
2.
Use FAMILY [ ][ ] to access the “UTILITY” screen.
3.
Use SELECT [ ][ ] to access the “Factory Reset”
screen.
“Yes” begins blinking in the screen.
4.
Press TEMPO [ (YES)].
The screen prompts “Sure?”
5.
Press TEMPO [ (YES)] once again.
Turning the Power Off
Listening to the Demo Songs
Adjusting the Display
Contrast
Returning the E-09 to Its
Factory-Set State
E-09_e.book 9 ページ ２００５年１１月２１日 月曜日 午前１１時２４分
To Next Page
Loading...
Need help?
General
