3
Before You Play
Turning the Power On/O
Press the [
L
] (power) button to turn on the power.
If you hold down the [
L
] (power) button for one second or longer, the
power turns o.
Making the Power Automatically Turn O After
a Time (Auto O)
The power to this unit will be turned o automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
O function). If you do not want the power to be turned o
automatically, disengage the Auto O function.
* Auto-o settings are automatically saved in this unit.
Hold down
1
2
240 min.
10 min.
Disabled
C7
30 min.
Auto o
10 minutes, 30 minutes, 240
minutes, Disabled (stay on)
(default: 30 minutes)
5 Any settings that you are in the process of editing will be lost
when the power is turned o. Before turning the power o, save
the data that you want to keep (“Reference manual” (PDF) “Saving
the Settings (Memory Backup)”).
5 To restore power, turn the power on again.
Adjusting the Volume
Use the two [VOLUME] buttons to adjust the volume.
[VOLUME] (right) button Increases the volume.
[VOLUME] (left) button Decreases the volume.
You can adjust the speaker volume when using the built-in speakers,
or the headphones volume when headphones are connected.
* The number of indicators lit above the [VOLUME] buttons changes
according to the volume setting. If all indicators are lit, the volume
is at its maximum. If all indicators are unlit, there will be no sound.
Connecting Equipment (Rear Panel)
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
DC In Jack
Connect the included AC adaptor here.
Power Cord
Place the AC adaptor so that the side with text
is downward.
AC Outlet
Phones Jack
Connect stereo mini-type
headphones or speakers
here.
PEDAL Jack
Connect the included pedal
switch or a separately sold
DP-10 damper pedal here.
For details about the USB FOR UPDATE port and the USB
COMPUTER port, refer to the “Reference manual” (PDF).
* Never insert or remove the USB ash drives while this unit is
turned on. Doing so may corrupt the unit’s data or the data
on the USB ash drives.
To Next Page
Loading...
Need help?
General
