Roland FP-90 User Manual

12
Advanced Operation
Copying a Saved Song (Copy Song)
Songs that have been saved in internal memory can be copied to
USB ash drive. Alternatively, songs stored on a USB ash drive can
be copied to internal memory.
* Audio les cannot be copied.
* If a USB ash drive is not connected, you won’t be able to perform
this operation.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Copy Song.”
2. Press the [Function] (Enter) button.
The Copy Song screen appears.
3. Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations.
4. Press the [J] button.
5. Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [Exit] button.
6. Press the [Function] (Enter) button.
The copy is executed.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
MEMO
If a song with the same le name has already been saved, the
conrmation message “Overwrite?” appears. To overwrite the
song, use the [J] button to select “Yes,” and then press the
[Function] (Enter) button.
7. Press the [Exit] button several times to exit Function mode.
Deleting a Saved Song (Delete Song)
Here’s how to delete a song that you saved on an internal memory or
USB ash drive.
MEMO
If you want to delete all songs that have been saved to internal
memory or USB ash drive, initialize the memory (p. 17).
* If you want to delete a song on the USB ash drive, connect your
USB ash drive to the USB Memory port before you continue.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Delete Song.”
2. Press the [Function] (Enter) button.
The Delete Song screen appears.
3. Use the [–] [+] buttons to select the memory location that
contains the song you want to delete.
4. Press the [J] button.
5. Use the [–] [+] buttons to select the song that you want to
delete.
6. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
7. Use the [J] button to select “Yes,” and then press the
[Function] (Enter) button.
The deletion is executed.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
8. Press the [Exit] button several times to exit Function mode.

Roland FP-90 Specifications

General

Brand	Roland
Model	FP-90
Category	Musical Instrument
Language	English