Roland GI-10 User Manual

j Basic Connections
Connecting the GI-10
Always turn OFF the power on all your devices
before making any connections. Connect the GI-10
to your MIDI unit using the supplied MIDI cable.
b= GK-2 series ay
es “Re
MIC IN
> =r
} DC IN : MIDI OUT HOLD 8 EXP PEDAL
4 ’
io
SC-55 mk Il, etc.
Notes
1. Other sections in this manual provide details
about the various ways of connecting external
units to the MIDI connectors. Refer to Ps8p12;
18.
2. Refer to p. 15 for information on connection of a
pedal switch to the hold jack.
IMPORTANT
The MIC IN jack is given priority whenever you
have something connected to both the GK IN
connector and MIC IN jack. So, if a guitar con-
nected to GK IN is played while a microphone
or other device has been left connected to MIC
IN, the data for the guitar will not be output
from MIDI OUT. To have the guitar data be out-
put, you first need to disconnect from the MIC
IN jack.
Installing
the
Rack
Mount
Adapter
If you plan to use the optional RAD-50 rack mount
adapter (sold separately), remove the two screws
from the GI-10 (see diagram), and use them to
secure the rack mount adapter in place.
If you are not going to be using a rack mount
adapter, attach the rubber feet as shown.

Roland GI-10 Specifications

General

Brand	Roland
Model	GI-10
Category	Media Converter
Language	English