EasyManuals Logo
Home>Roland>Electronic Keyboard>GO:KEYS

Roland GO:KEYS User Manual

Roland GO:KEYS
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Operating Guide
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Installing Batteries
If six commercially available nickel-metal hydride or alkaline AA batteries are installed, you can
perform without connecting an AC adaptor.
1. Remove the battery cover.
2. Install the batteries, making sure that they are oriented correctly.
3. Close the battery cover.
* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you
carefully observe all of the items related to batteries that are listed in “USING THE UNIT SAFELY and
“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owners Manual p. 13).
* When the batteries run low, the display indicates “Battery Low!” When this occurs, install fresh batteries.
Turning the Power On/O
1. Press the [
L
] (power) button to turn on the power.
2. Use the [ ] [ ] buttons to adjust the volume.
3. To turn the power o, hold down the [
L
](power) button for one
second or longer.
Concerning the Auto O function
The power to this unit will be turned o automatically after a predetermined amount of time has passed since it was last used for playing
music, or its buttons or controls were operated (Auto O function).
If you do not want the power to be turned o automatically, disengage the Auto O function (p. 9).
NOTE
To restore power, turn the power on again.
1 2
Connecting Equipment
USB COMPUTER port
You can connect this instrument to your
computer, and back up this instruments
song data and settings to the computer
(p. 7).
Use a commercially available micro USB
cable to make this connection.
* Do not use a micro USB cable that is
designed only for charging a device.
Charge-only cables cannot transmit
data.
DC IN jack
Connect the
included AC adaptor
here.
PEDAL jack
You can connect a pedal switch
(sold separately: DP series) and
use it as a hold pedal.
If this is connected,
is lit.
PHONES/OUTPUT jack
You can connect headphones
(sold separately) or an amplied
speaker here.
If this is connected,
is lit.
AUX IN jack
You can connect an
audio player (such as a
smartphone) or other
audio playback device
here.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland GO:KEYS and is the answer not in the manual?

Roland GO:KEYS Specifications

General IconGeneral
BrandRoland
ModelGO:KEYS
CategoryElectronic Keyboard
LanguageEnglish

Related product manuals