6
Before You Play
6
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
* Never turn o the power, disconnect the USB ash drive or unplug the power cord while this instrument is in the middle of an operation (the topmost
three volume indicators blink).
* Never turn o the power or disconnect a USB ash drive or the power cord while the USB ash drive access indicator is blinking.
Connecting Other Devices
DC In jack
Connect the included AC adaptor to this jack.
Stereo mini
plug
USB ash
drive
Stereo 1/4”
phone type
Phones jacks
Connect your headphones here. This piano has two headphone
jacks, so two people can use headphones at the same time.
USB Memory port
Connect a USB ash drive (commercially available) here. You can play
back the songs that you’ve copied to the USB ash drive
(p. 8, p. 10).
USB Computer port
Connect your computer here. Use a USB cable
(commercially available) to make this connection.
If your computer is connected, performance
data can be transferred between the piano and
sequencer software on your computer, allowing
you to produce or edit music.
Power cord
To AC outlet
Pedal jack
Connect the pedal cord for the
dedicated stand here. Refer to the
“Leaet Stand Assembly” for details.
Bottom
Side
Headphone Hook
Whenever you are not using the headphones, you can hang them
on the headphone hook.
* Don’t hang anything other than headphones on this hook, and don’t apply
excessive force to it. Doing so may damage the headphone hook.
To Next Page
Loading...
Need help?
General
