Various Settings (Function Mode)
Indication Value Explanation
Wireless
Wireless LAN Function Settings
You can view or edit the wireless settings (p. 47).
Display Contrast
Adjusting the Brightness of the Display (Display Contrast)
You can adjust the brightness of the HP508’s display (p. 44).
MEMO
This setting is automatically saved in the HP508.
1–10
Volume Limit
Specifying the Maximum Volume (Volume Limit)
You can specify the maximum volume setting. This will prevent undesirably high volumes
even if the [Volume] buttons are operated unintentionally.
20, 40, 60 ,80, 100
Language
Changing the Language Displayed in the Screen (Language)
You can change the language that is displayed in the screen.
English, Japanese
Auto O
Making the Power Automatically Turn O After a Time (Auto O)
With the factory settings, the unit’s power will automatically be switched o 30 minutes after you stop playing or operating the unit.
If you don’t want the power to turn o automatically, change the “Auto O” setting to “O” (p. 44).
MEMO
This setting is automatically saved in the HP508.
Memory Backup
Storing Your Settings (Memory Backup)
The HP508’s settings will return to their default settings when you turn o the power, but you can store these settings so that they will retain the
changes you made even after the power is turned o, then on again (p. 44).
Factory Reset
Restoring the Factory Settings (Factory Reset)
When you execute the “Factory Reset” function, the settings you’ve edited in Function mode will be restored to their factory-set state (p. 45).
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 44).
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 44).
54
To Next Page
Loading...
Need help?
General
