Roland PD-85 User Manual

3
Next
Attach the PD-85 to a stand (MDS series).
fig.Stand.e
When attaching the PD-85 to a tom stand, check the
dimensions of the rod. Depending on the dimensions of
the rod, it may not be possible to attach the pad to the
stand.
Acceptable rod diameters:
8.5–11.5 mm (3/8 to 1/2 inch)
Connecting to a percussion sound module (TD-20, TD-12, TD-
10, TD-8, TD-6V/6, TD-3, etc.).
When you have finished connecting to your percussion sound
module, refer to the owner’s manual supplied with the sound
module, and make the settings for it.
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
• Use the included stereo cable to make connections.
Otherwise (if you use a monaural cable), you won’t be
able to employ rim shot and cross stick playing
techniques.
• Connect the L-shaped plug of the included cable to the
PD-85. This will prevent strain from being applied to the
PD-85.
Attaching the Pad to a Stand
Rod
Pass the rod through the pipe
that is inside the holder.
Tighten
Loosen
Connecting To A Percussion
Sound Module
Percussion
Sound Module
Rim Shot Capable
Trigger Inputs
TD-20
2 (SNARE), 3–6 (TOM 1–4),
12–15 (AUX 1–4)
TD-12 2 (SNARE), 3–5 (TOM 1–3),
11 (AUX 1), 12 (AUX 2)
TD-10 2 (SNARE)
TD-8 3 (SNARE)
TD-6V/6 2 (SNARE)
TD-3 SNARE
PD-85_e 3 ページ ２００５年１月３１日 月曜日 午前１０時１１分

Roland PD-85 Specifications

General

Brand	Roland
Model	PD-85
Category	Drums
Language	English