Before using the unit, ensure that its system program is at the most recent version. For information on available upgrades for the system
program, see the Roland website (https://proav.roland.com/).
You can check the system program version by pressing the [SETUP] button to access the Setup Menu screen
0
“Root “System”
0
“Information.”
© 2020 Roland Corporation
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Startup Guide (p. 8)).
After reading, keep the document(s) where it will be available for immediate reference.
Rack-Mounting
Attaching the rack-mount angles
By attaching the included rack-mount angles to this unit, you can
mount it in a rack.
1. Remove the screws from the side panels.
2. Using the screws that you removed, attach the rack-
mount angles as shown in the illustration.
NOTE
5 Install in a well-ventilated location.
5 Do not block the cooling vents located on the unit’s side
panels.
5 Avoid mounting the unit in a sealed-type rack. Warm
air within the rack cannot escape and is sucked into the
unit, making ecient cooling impossible.
5 If the back of the rack cannot be opened, install an exhaust port
or ventilation fan at the top back surface of the rack, where warm
air collects.
5 When using the unit while mounted in a movable case
(portable rack), remove the front and rear rack covers so that the
front and back of the unit are not obstructed.
5 Take care not to pinch your ngers etc. while mounting the unit
in a rack.
Free-Standing Use
Attaching the rubber feet
If you will be placing this unit on a desk or shelf for use, attach the
included rubber feet (4 pcs.). This prevents the unit from slipping or
from scratching the surface on which it is placed.
1. Remove the rubber feet from the sheet.
2. Peel the double-sided tape o the rubber feet, and
ax the feet so that they cover the four guide holes on
the bottom of the unit.
PDF Manual (download from the Web)
Details on operations and menu lists are provided in “Reference
Manual” (PDF).
Downloading
1.
Access the Roland website.
https://proav.roland.com/
2. Move to the product page
0
click “Support”
0
download the applicable PDF le.
Startup Guide