7- CLEANING
•
Your appliance must be unplugged before proceeding with any cleaning work.
•
You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
8- STORAGE
•
Your appliance must be unplugged before proceeding with any cleaning work.
• It is important to allow the appliance to cool before winding the lead.
•
When you are not using your appliance, store it in a dry place.
9- IN THE EVENT OF PROBLEMS
• Never dismantle your appliance yourself. A poorly repaired appliance may be dangerous for the user.
•
Before contacting one of our Approved Service Centres (see enclosed list), ensure that the appliance is set to normal operating mode.
10- ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled.
L
eave it at a local civic waste collection point.
GB
6- OPERATION
S
tarting up the appliance and choosing the operating mode:
•
Power Selection
M
od BU2510:
-
One switch ( 1 ) pressed and indicator light on : power 600W.
-
One switch ( 2 ) pressed and indicator light on : power 900W.
-
One switch ( 1 + 2 ) pressed and indicator light on : power 1500W.
M
od BU2520:
- One switch ( 1 ) pressed and indicator light on : power 800W.
-
One switch ( 2 ) pressed and indicator light on : power 1200W.
- One switch ( 1 + 2 ) pressed and indicator light on : power 2000W.
•
Thermostat:
Adjust the temperature setting, according to your own comfort, by turning button B.
• Frost-free setting :
-
This setting enables you to automatically maintain the temperature above 0°C in a normally insulated room, whose volume corresponds to the power of
y
our appliance.
- To do this, plug in your appliance and turn button B so that the marker is opposite the “ ” symbol and press a power selection switch C indicator light on.
BU2510-20 NC00007798(A).qxd:NC00007798(A) 17/02/09 13:21 Page 8
To Next Page
Loading...
Need help?
General
