Rowenta FIRST CLASS User Manual

STEAM IRONING
Filling the water tank.
2 min
ON
OFF
ON
OFF
110V 220V
Setting the temperature.
5
Note !
Your iron has been designed to operate using untreated tap water.
Important: Heat concentrates the elements contained in water during evapora-
tion.
The types of water listed below may contain organic waste, or chemical elements
that can cause spitting, brown staining, or premature wear of the appliance: water
from clothes dryers, scented or softened water, water from refrigerators, batte-
ries, air conditioners, rain water, boiled, filtered or bottled water.
Important : Before filling the water tank, unplug the iron .
The steam selector should be switched into the “OFF” position.
Do not hold the iron under the tap while filling.
Your iron will only produce steam when the control is set within the coloured
zone and the steam switch is in the on position.
ON
OFF
ON
OFF
120V 240V
ON
OFF
OK

Rowenta FIRST CLASS Specifications

General

Brand	Rowenta
Model	FIRST CLASS
Category	Iron
Language	English