ENG
• It is important that the front
of the awning is perfectly
horizontal. There is a built-in
spirit level at the front of the
awning. You can use the spirit
level to check that the front
of the awning is perfectly
horizontal.
• The awning’s valance can be
easily removed sideways if you
prefer the awning without it.
MAINTENANCE
• Regular maintenance is important for safety purposes and for extending the service
life of the awning.
• Avoid stains on the awning. The awning should be clean and dry when retracted. If it is
retracted while it is wet, it should be extended as soon as possible in order to allow it
to dry.
• Check regularly to ensure that the awning’s wires inside the arms are not damaged.
Do not use the awning if the wires are not in good condition.
• Check regularly to ensure that the wall brackets are securely fastened.
• Inspect the screws and nuts twice per year. Tighten them if they are loose.
• Do not use the awning if it is damaged or if it is not properly fastened. Contact an
authorised technician for repairs.
• Under normal circumstances it is not necessary to lubricated the moving parts of the
awning. If lubrication is necessary, petroleum based lubricants may not be used.
• When lubricating, use a spray nozzle with tube. Thoroughly lubricate the area between
the end of the supporting bar and the bracket. Avoid spraying the awning canopy.
6
To Next Page
Loading...
Need help?
General
