8
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Sanding Pad Length ..............................................5-1/2 in.
Cord Length ...............................................................10 ft.
Orbit Diameter ........................................................ 1/16 in.
No Load Speed .................................. 12,500 r/min. (RPM)
Input ................................. 120 V, 60 Hz, AC only, 1.2 Amp
KNOW YOUR COMPACT FINISH SANDER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
CIRCULAR SANDING ACTION
The oscillating action of the sander produces very quick,
small circular motion of the sanding pad. The motion is
ideal for producing a fine finished grain or, when using
the scrubbing pad, removing light rust, paint, and other
buildup from the work surface.
DUST BAG
The dust bag collects dust through punched holes in the
sandpaper and hook-and-loop pad, keeping dust to a
minimum.
GRIPZONE™ OVERMOLD TECHNOLOGY
The sander features GripZone™ overmold technology for
improved comfort with a positive grip.
PAPER PUNCH
The paper punch template punches sandpaper for proper
fit and alignment.
QUICK CHANGE HOOK-AND-LOOP PAD
The hook-and-loop design allows for quick change of sand-
ing sheets and scrubbing pads. It also enables you to easily
clean and reuse them.
TRI-FLEX PAD DESIGN
The top two-thirds of each sanding sheet is a detachable
triangle that can be rotated to extend sheet life and promote
even wear.
Dust bag
paper punch
heavy-Duty scrubbing paD
(reD)
Light scrubbing paD
(white)
poLishing paD
(gray)
sanDing sheet
To Next Page
Loading...
Need help?
General
