3 English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
Ŷ Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
Ŷ Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories or
storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
Ŷ Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Ŷ Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
Ŷ Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Ŷ Use the power tool, accessories and
tool bits etc, in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
Ŷ Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
Ŷ Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
Ŷ When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
Ŷ Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help.
Ŷ Liquid ejected from the battery may
cause irritation or burns.
SERVICE
Ŷ Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that safety of the power tool is
maintained.
WARNING
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify
any problems or damage to it. Any par that
is damaged should be properly repaired or
replaced by an authorised service centre.
LINE TRIMMER SAFETY WARNINGS
Ŷ Some regions have regulations that restrict
the use of the product. Check with your
local authority for advice.
Ŷ Never allow children or people unfamiliar
with the instructions to use the product.
Ŷ Use the product in daylight or good artificial
light.
Ŷ Avoid using on wet grass.
Ŷ Do not walk backwards when using the
product.
Ŷ Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance. Always be sure of your footing
on slopes. Walk, never run.
Ŷ Do not operate the product when there is a
risk of lightning.
Ŷ Do not expose the product to rain or wet
conditions. Water entering an appliance
will increase the risk of electric shock.
Ŷ Keep bystanders, children and pets 15 m
away from the area of operation, stop the
product if anyone enters the area.
Ŷ Keep the cutting attachment below waist
level.
Ŷ Never operate the product with damaged
guards or without guards in place.
To Next Page
Loading...
Need help?
General
