16
TRANSPORTATION AND STORAGE
See Fig.31.
■ Stop the product, remove the battery pack and allow
the product to cool down before storing or transporting.
■ Do not store or transport the chainsaw when it is
running. The chainsaw should always be idle before
storing or transporting.
■ Always place the guide bar scabbard on the bar and
chain before storing or transporting the chainsaw. Use
caution to avoid the sharp teeth of the chain.
■ Clean the chainsaw thoroughly before storing. Store the
chainsaw indoors, in a dry place that is locked and/or
inaccessible to children.
■ Keep away from corrosive agents such as garden
chemicals and de-icing salts
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye, ear and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy duty gloves.
Beware of chainsaw kickback and
avoid contact with bar tip.
Hold and operate the product properly
with both hands.
Do not operate the product using only
one hand.
Do not expose to rain or damp
condition.
Remove the battery pack before
starting any work on the product.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
SYMBOLS IN THIS MANUAL
The following signal words and meanings are intended to
explain the levels of risk associated with the product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
Fig 31
To Next Page
Loading...
Need help?
General
