PRODUCT SPECIFICATIONS
Cordless Pole Hedge Trimmer
Model RPT184515 / RPT184520
/ OPT1845
Rated voltage DC 18 Volts
No-load speed 1,350 min
-1
Stroke rate at no load 2,700 spm
Usable cutting length 450 mm
Cutting capacity 18 mm
Maximum product working length 2.93 m
Weight (with harness, without
battery and charger)
4.2 kg
Vibration level (in accordance with annex C of EN ISO
10517:2009+A1:2013)
Vibration total value 1.25 m/s
2
Uncertainty of measurement 1.5 m/s
2
Noise emission level (in accordance with annex D of EN ISO
10517:2009+A1:2013)
A-weighted sound pressure level
at operator’s position
81.1 dB(A)
Uncertainty of measurement 2.5 dB
A-weighted sound power level 92.8 dB(A)
Uncertainty of measurement 1.75 dB
BATTERY AND CHARGER
Model RPT184515 RPT184520 OPT1845
Battery pack RB18L15 RB18L20 Not included
Charger BCL14181H RC18120 Not included
Compatible
battery packs
RB18L13, RB18L15, RB18L20, RB18L25,
RB18L26, RB18L40, RB18L50,
Compatible
chargers
BCL-1800, BCL1418, BCL1418IV, BCL14181H,
BCL14183H, BCS618G, RC18150U, RC18627,
RC18115, RC18120, RC18150
REPLACEMENT PARTS
HEDGESWEEP
TM
526799003
Scabbard 526798003
Harness 308319004
VIBRATION LEVEL
WARNING
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
The vibration emission during actual use of power tool
can differ from the declared total value depending on the
ways in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
