Ryobi P530 User Manual

6
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
Read The Operator’s Manual
Safety Alert
No Hands Symbol
No Hands Symbol
No Hands Symbol
No Hands Symbol
SYMBOL NAME DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Precautions that involve your safety.
Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
serious personal injury.
Wet Conditions Alert
.../min
Per Minute
Class II Construction
n
o
No Load Speed
Direct Current
Alternating Current
min Minutes
W Watt
Hz Hertz
A Amperes
V Volts
Hot Surface
To reduce the risk of injury or damage, avoid contact with
any hot surface.

Ryobi P530 Specifications

General

Type	Reciprocating Saw
Motor	Brushless
Power Source	Battery
Voltage	18V
Battery Compatibility	Ryobi 18V ONE+
Stroke Length	1-1/8 inch

Summary

General Safety Rules

Work Area Safety

Keep work area clean and well lit to prevent accidents.

Electrical Safety

Use correct charger and battery pack; avoid cord damage.

Personal Safety

Stay alert, dress properly, avoid accidental starting, remove wrenches.

Specific Safety Rules

Battery Tool Safety

Precautions for battery-powered tools, including charging and handling.

Usage Environment Safety

Safety regarding temperature and potential battery leakage.

Safety Rules for Charger

Charger Use Precautions

Rules for safe charger operation, cord usage, and environmental conditions.

Extension Cord Usage

Guidelines for selecting and using extension cords with the charger.

Charger Damage and Repair

Procedures for handling damaged chargers and avoiding misuse.

Signal Words and Safety Alerts

Signal Word Definitions

Meanings of DANGER, WARNING, and CAUTION signal words.

Service Warnings

Warnings related to tool servicing and repair procedures.

Operation

Attaching Circle Cutter

Steps to attach the circle cutter to the speed saw.

Applications

Battery Charging Caution

Battery Charging and LED Functions

LED Status Indicators

Charging Battery Packs

Operating the Speed Saw

Installing and Removing Battery Pack

Starting and Stopping

Cutting Techniques

Using the Circle Cutter

Circle Cutting Procedure

Cutting Caution

Adjustments

Inserting and Removing Bits

Adjusting Depth of Cut