EasyManuals Logo

Ryobi P7101 User Manual

Ryobi P7101
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
8 — English
TROUBLESHOOTING
This product has a Three-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-525-2579.
LED
PRIMARY
LED
FUNCTION
SECONDARY
LED
FUNCTION ERROR SOLUTION
ERROR Flashes Red none none
Internal temerature
too high
Stop using the unit and allow to cool
before using
ERROR Flashes Red POWER
Flashes
Green
18V Battery is not
charged or charge
capacity is too low
Charge the battery pack to a
minimum of 50%
ERROR Solid Red START
Flashes
Green
The clamps are not
connected
Vehicle battery
voltage is below 0.8V
or is not detected
Check clamps, reconnect if
neccessary
Follow instructions in Using the
Jump Starter in Override Mode
section.
ERROR Flashes Red START
Flashes
Green
The clamps are
reverse connected
Check clamp connection. Connect
the red clamp to the positive terminal
(+) and the black clamp to the
negative (-) terminal.
ERROR Solid Red START Solid Green
Vehicle battery
voltage is too high
(greater than 13V)
Check vehicle voltage. For use only
with 12V batteries

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ryobi P7101 and is the answer not in the manual?

Ryobi P7101 Specifications

General IconGeneral
BrandRyobi
ModelP7101
CategoryRemote Starter
LanguageEnglish

Related product manuals