PRODUCT SPECIFICATIONS
Cordless lawnmower
Model R18XLMW20
Rated voltage
18 V d.c.
Width of cut 37 cm
Height of cut 25 - 70 mm
No-load speed
3, 800±10% /min
Weight (without battery) 11.0 kg
Grass catcher capacity 40 L
Blade bolt torque 35~40 Nm
Vibration level (in accordance with
Annex FF of EN 60335-2-77)
a
h
= 0.6 m/s
2
Uncertainty of measurement K = 1.5 m/s
2
Noise emission level (in accordance with Annex GG of EN 60335-
2-77)
A-Weighted sound pressure level at
operator’s position
L
pA
= 82.2 dB(A)
Uncertainty of measurement K = 2.5 dB
A-Weighted sound power level L
wA
= 91.8 dB(A)
Uncertainty of measurement K = 2.5 dB
L
wA
+ K
wA
95 dB(A)
BATTERY AND CHARGER
Model R18XLMW20 R18XLMW24
Battery pack - RB18L40
Weight
- 0.73 kg
Charger - RC18120
Compatible
battery packs
RB18L13, RB18L15, RB18L15A, RB18L15B,
RB18L20, RB18L20A, RB18L25, RB18L26,
RB18L40, RB18L40A, RB18L50, RB1820C,
RB1840C, RB18L60A, RB18L90A
Compatible
chargers
BCL14181H, BCL14183H, RC18115,
RC18120, RC18150, RC18627
REPLACEMENT PARTS
Blade RAC435 (682391001)
WARNING! The declared vibration total
values and the declared noise emission values
given in this instruction manual have been
measured in accordance with a standardised
test and may be used to compare one tool with
another. They may be used for a preliminary
assessment of exposure.
The declared vibration and noise emission
values represent the main applications of the
tool. However, if the tool is used for dierent
applications, used with dierent accessories,
or poorly maintained, the vibration and noise
emission may dier. These conditions may
signicantly increase the exposure levels
over the total working period. An estimation
of the level of exposure to vibration and noise
should take into account the times when the
tool is turned o or when it is running idle.
These conditions may signicantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect
the operator from the eects of vibration and
noise, such as maintaining the tool and the
accessories, keeping the hands warm (in case
of vibration), and organising work patterns.