PRODUCT SPECIFICATIONS
Cordless lawnmower
Model R36XLMW10
Rated voltage
36 V d.c.
Width of cut 46 cm
Height of cut 25 - 100 mm
No-load speed
3600/min Max
Maximum cutting speed 3600/min
Weight (without battery) 22.5 kg
Grass catcher capacity 55 L
Blade bolt torque 35~40 Nm
Vibration level (in accordance with
Annex FF of EN 60335-2-77)
a
h
= 1.0 m/s
2
Uncertainty of measurement
K = 1.5 m/s
2
Noise emission level for 3600/min rated speed (in accordance with
Annex GG of EN 60335-2-77)
A-Weighted sound pressure level at
operator’s position
L
PA
= 88.3 dB(A)
Uncertainty of measurement
K = 3.0 dB
A-Weighted sound power level
L
WA
= 97.5 dB(A)
Uncertainty of measurement
K = 2.5 dB
L
WA
+ K
WA
100 dB(A)
BATTERY AND CHARGER
Model
R36XLMW16 R36XLMW10
Battery pack
BPL3660D
-
Weight
1.96 kg
-
Charger
BCL3660F
-
Compatible
battery packs
BPL3620D, BPL3626, BPL3626D,
BPL3626D2, BPL3640, BPL3640D,
BPL3640D2, BPL3650, BPL3650D,
BPL3650D, BPL3650D2, BPL3660D,
BPL3690D, BPL3612D, R36BTY2,
R36BTY4, R36BTY5
Compatible
chargers
BCL3617S, BCL3617U, BCL3650F, BCL3660F
REPLACEMENT PARTS
Blade RMLB1 (000990214)
Grass catcher 317048001
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for dierent applications, used with dierent accessories,
or poorly maintained, the vibration and noise emission
may dier. These conditions may signicantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned o or when
it is running idle. These conditions may signicantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the eects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.