SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOLS NAME EXPLANATION
Safety Alert Symbol Indicates danger, warning or caution. it means attention!!!
Your safety is involved.
Read Your Operator's Manual Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satification and safe use.
Wear eye and hearing protection Wear eye, and hearing protection when operating this
equipment.
Keep bystanders away Keep all bystanders at least 15m away.
Ricochet Danger of Ricochet.
Tri-Arc blade Tri-Arc blade is appropriate for this unit and is suited for cutting
pulpy weeds and vines.
Do not use toothed blade This unit is not intended for use with a toothed saw type blade.
RPM Decal Rotational direction and maximum speed of the shaft for the
cutting attachment.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when mixing fuel or filling fuel tank.
Petrol Use unleaded petrol intended for motor vehicle use with an
octane rarting of 87([R+M]/2) or higher.
Oil Use synthetic 2-stroke oil for air cooled engines.
Mix Petrol and Oil Mix the fuel mix thoroughly and also each time before refuelling.
Fully press and release the prime bulb 8 times.
To Next Page
Loading...
Need help?
General
