PRODUCT SPECIFICATIONS
Model RCS1935B RCS2340B
Rated power 1900W 2300W
Rated voltage 230-240V ~50Hz
Guide bar length 356 mm (14”) 406 mm (16”)
Usable cutting length 340 mm (13”) 380 mm (15”)
Chain brake stop
<0.12 s
Chain oil tank capacity
150 ml
Weight (with guide bar,
chain and empty tank)
4.7 kg 4.8 kg
Vibration level
Front handle
3.1 m/s
2
6.0 m/s
2
Rear handle
5.0 m/s
2
9.4 m/s
2
Uncertainty of
measurement
1.5 m/s
2
Noise emission level (in accordance with EN 60745-1 and EN
60745-2-13)
A-weighted sound
pressure level at
operator’s position
92 dB(A) 93 dB(A)
Uncertainty of
measurement
3 dB(A)
A-weighted sound
power level
103 dB(A) 104 dB(A)
Uncertainty of
measurement
3 dB(A)
REPLACEMENT PART (BAR AND CHAIN)
Model RCS1935B RCS2340B
Manufacturer
OREGON RYOBI OREGON RYOBI
Chain 3-; RAC248 3-; RAC253
Bar 140SDEA041
RAC247 160SDEA041 RAC249
&KDLQPXVWEH¿WWHGZLWKEDUIURPWKHVDPHPDQXIDFWXUHU
according to above combinations.
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
