PRODUCT SPECIFICATIONS
Electric hedge trimmer
Model RHT5655RS RHT6160RS
Rated power 550 W 600 W
Rated voltage 230-240 V a.c
50 Hz
230-240 V a.c.
50 Hz
No-load speed 1500 min
-1
1500 min
-1
Blade length 55 cm 60 cm
Cutting capacity 26 mm 28 mm
Weight 3.7 kg 3.8 kg
Vibration level (in accordance with EN 62841-1 and EN 62841-4-2)
Front handle a
h
= 3.659 m/s
2
a
h
= 3.659 m/s
2
Rear handle a
h
= 3.394 m/s
2
a
h
= 3.394 m/s
2
Uncertainty of
measurement
K = 1.5 m/s
2
K = 1.5 m/s
2
Noise emission level (in accordance with EN 62841-1 and EN
62841-4-2)
A-weighted sound
pressure level at the
operator’s position
L
pA
= 85.05 dB (A) L
pA
= 85.05 dB (A)
Uncertainty of
measurement
K = 3 dB K = 3 dB
A-weighted sound
power level
L
WA
= 93.05
dB (A)
L
WA
= 93.05
dB (A)
Uncertainty of
measurement
K = 1.51 dB K = 1.51 dB
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for dierent applications, used with dierent accessories,
or poorly maintained, the vibration and noise emission
may dier. These conditions may signicantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned o or when
it is running idle. These conditions may signicantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the eects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.