12
MAINTENANCE SCHEDULE
Before
each use
After 1st month
or 20 hours of
operation
Every 3 months
or 50 hours of
operation
Every 6 months
or 100 hours
of operation
Every 12 months
or after 300
hours
of operation
Check engine oil
n
Change engine oil
n n
Check air lter
n
Clean air lter
n
Change air lter
n
Check/adjust spark plug
n
Replace spark plug
n
Check/adjust idle speed
n
Check/adjust valve
clearance*
n
Clean fuel tank and lter*
n
Check fuel tube
n
Check for worn or
damaged parts
n
Check all starting
interlock and throttle
lever for proper
functionality
n
Check if the blade stops
within 6 seconds after
setting the throttle lever
to the “Stop“ position
(hard up against the top
of the mower handles)
n
* These items should only be carried out by an authorised service center.
NOTE: Maintenance should be performed more frequently when the product is used in dusty areas.
When the engine has exceeded the maximum figures specified in the table, maintenance should still be cycled
according to the intervals of time or hours stated herein.
To Next Page
Loading...
Need help?
General
