11
TRANSPORTATION
■ Stop the product. Make sure that all moving parts have
come to a complete stop. Allow the product to cool
down before storing or transporting. Disconnect the
spark plug wire.
■ Clean all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep the product away from
corrosive agents such as garden chemicals and de-
icing salts. Do not store the product outdoors.
■ For transportation in a vehicle, secure the product
against movement or falling to prevent injury to persons,
damage to the product, or loss of fuel.
WARNING
Use caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp, keep all body parts away from the blade
while it is exposed.
PRODUCT SPECIFICATIONS
Petrol Lawn Mower RLM46190YB
Engine displacement 190 cc OHC
Type 4 stroke air cooled engine
No-load speed of cutting
means
2800 min
-1
Fuel consumption at Max.
Engine performance
1.4 kg/h
Specic fuel consumption at
Max. Engine performance
395 g/kW.h
Cutting width 46 cm
Self-propelled speed 1.2 m/s
Cutting height adjustment 8 positions, 20 mm - 75 mm
Wheel size (Front/ Rear) 17.8 cm (7 in.) /
20.3 cm (8 in.)
Fuel tank capacity 1200 ml (+/-50 ml)
Fuel type Unleaded fuel (91 or higher)
Oil type SAE 10W-30 API-SJ or higher
weight oil
Engine sump capacity 600 ml (+/-50 ml)
Net weight 38.6 kg
Grass catcher capacity 55 L
Disc bolt, blade bolt and blade
lock nut torque
35~45 Nm
Engine mounting bolt torque 20~25 Nm
Vibration Level (in accordance with Annex G of EN ISO 5395-1)
Right Handle 2.3 m/s
2
Left Handle 2.15 m/s
2
Uncertainty of Measurement 1.5 m/s
2
Declared vibration value 5 m/s
2
Noise emission level (in accordance with AS3534-1988)
The guaranteed sound power
level LwA
97 dB(A)
Replacement part
Blade 099923021001
Rear drive wheel 099923022075
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
To Next Page
Loading...
Need help?
General
