Ryobi RPD800 User Manual

PRODUCT SPECIFICATIONS
Hammer drill
Model RPD800
Voltage 220 - 240 V
50 Hz
Input
800 W
No-load speed 0 - 3,000 min
-1
Blows per minute (Impact rate)
0 - 51,000 min
-1
Chuck capacity
13 mm
Drilling capacity
in wood
34 mm
in metal
13 mm
in masonry
16 mm
Weight
(According to EPTA procedure 01/2014)
1.8 kg
Measured sound values determined according to EN 62841:
A-weighted sound pressure level L
pA
= 95.0 dB
Uncertainty K 5.0 dB (A)
A-weighted sound power level L
WA
= 106.0 dB
Uncertainty K 5.0 dB (A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Impact drilling into concrete a
h,ID
= 16.2 m/s
2
Uncertainty K 1.5 m/s
2
Drilling into metal a
h,D
= 5.2 m/s
2
Uncertainty K 1.5 m/s
2
Screwdriving without impact a
h
≤ 2.5 m/s
2
Uncertainty K 1.5 m/s
2
VIBRATION LEVEL
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
signicantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work patterns.

Ryobi RPD800 Specifications

General

Brand	Ryobi
Model	RPD800
Category	Drill
Language	English