Page 2
TABLE OF CONTENTS
Introduction ..................................................................................................................................................................... 2
General Safety Rules .................................................................................................................................................. 3-4
Specific Safety Rules ......................................................................................................................................................4
Symbols ...........................................................................................................................................................................5
Electrical ..........................................................................................................................................................................6
Features ..........................................................................................................................................................................7
Unpacking....................................................................................................................................................................... 7
Assembly ................................................................................................................................................................... 8-10
Operation ...................................................................................................................................................................... 11
Maintenance ................................................................................................................................................................. 12
Accessories .................................................................................................................................................................. 13
Parts Ordering / Service ............................................................................................................................................... 14
The operation of any sander can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and a full face shield when needed. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always wear eye protection which is marked to comply with ANSI Z87.1.
WARNING:
Look for this symbol to point out important safety precautions.
It means attention!!! Your safety is involved.
INTRODUCTION
This tool has many features for making its use more
pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design
of this product making it easy to maintain and operate.
WARNING:
Do not attempt to use this product until you read thor-
oughly and understand completely the operator's manual.
Pay close attention to the safety rules, including Dangers,
Warnings, and Cautions. If you use this tool properly and
only for what it is intended, you will enjoy years of safe,
reliable service.
To Next Page
Loading...
Need help?
General
