Ryobi RY40430 User Manual

6 — English
PRODUCT SPECIFICATIONS
Motor ..................................................................................................................................................................... 40 Volts DC
Air Velocity .................................................................................................................................................................325 CFM
Weight (without battery pack) ........................................................................................................................................ 4.1 lbs
FEATURES
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLOWER TUBE
The blower tube can be installed on the blower without
using any tools.
OVERMOLD HANDLE
Ergonomic handle with overmold improves comfort and grip.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute

Ryobi RY40430 Specifications

General

Brand	Ryobi
Model	RY40430
Category	Blower
Language	English

Summary

Introduction

Product Overview

Highlights the product's features, focusing on pleasant and enjoyable use, safety, performance, and dependability.

Important Safety Instructions

General Safety Precautions

Covers user awareness, handling, environmental hazards, and avoiding accidental starts.

Personal Protective Equipment (PPE)

Always wear eye protection. Use dust mask, non-skid shoes, hard hat, or hearing protection as appropriate.

Battery and Charger Safety

Includes proper charging, battery pack handling, storage, and disposal of damaged batteries.

Safe Operation Practices

Covers bystander safety, work area, blower direction, surface stability, and chemical use.

Symbols

Signal Word Meanings

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.

Product Symbols and Explanations

Defines symbols like Safety Alert, Read Operator's Manual, Eye/Hearing Protection, and Impeller Blades.

Features

Product Specifications

Lists specifications like motor voltage, air velocity (CFM), and weight without battery pack.

Blower Tube Installation

The blower tube can be installed on the blower without using any tools.

Overmold Handle

Ergonomic handle with overmold improves comfort and grip.

Assembly

Unpacking Instructions

Carefully remove product and accessories, check packing list, inspect for damage, and contact for missing parts.

Assembling Blower Tube

Instructions on how to slide and secure the blower tube onto the blower housing outlet.

Operation

Battery Pack Installation and Removal

Instructions on how to properly install and remove the battery pack, ensuring it is securely seated.

Starting and Stopping the Blower

How to start the blower by depressing the switch trigger and stop it by releasing the switch trigger.

Maintenance

General Maintenance

Clean plastic parts with clean cloths. Avoid solvents and chemicals that can damage plastic.

Storage Instructions

Store indoors in a secure place inaccessible to children, away from corrosive agents.

Battery Pack Recycling

Cover terminals with tape, do not disassemble, and recycle or dispose of properly.

Warranty

Limited Warranty Statement

Details warranty coverage, duration, limitations, and exclusions for the RYOBI outdoor product.

Parts and Service Information

Obtaining Replacement Parts

Purchase parts online at www.ryobitools.com or by calling 1-800-860-4050.

Locating an Authorized Service Center

Authorized Service Centers can be located online at www.ryobitools.com or by calling 1-800-860-4050.

Customer or Technical Support

Contact customer or technical support by calling 1-800-860-4050.