6 — English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
Moving Parts Keep hands away from moving parts.
Recycle Symbol
This product uses lithium-ion (Li-ion) batteries. Local, state,
or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information
regarding available recycling and/or disposal options.
V Volts Voltage
hrs Hours Time
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
PRODUCT SPECIFICATIONS
Motor ......................................................................40 V DC
Blade Length .............................................................. 18 in.
Cutting Capacity........................................................ 5/8 in.
Cutting Speed ............................................ 3,000 cuts/min.
FEATURES
KNOW YOUR HEDGE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE COVER
The blade cover keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage.
GUARD
The guard helps to deflect chips or other debris away from
the operator’s hands.
LOCK-OUT
The lock-out prevents accidental starting.
FOUR-POSITION PIVOTING HEAD
The hedge trimmer head can be adjusted with the pivot button.
VARIABLE SPEED SWITCH TRIGGER
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
To Next Page
Loading...
Need help?
General
