Page 10 – English
PROBLEM POSSIBLE CAUSE SOLUTION
Motor fails to start when switch is
turned on.
Power cord is not plugged in or con-
nection is loose.
Household circuit breaker is tripped.
Plug in the power cord.
Check circuit breaker.
TROUBLESHOOTING
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic, which could result in serious personal
injury.
STORAGE (1 MONTH OR LONGER)
Clean all foreign material from the blower.
Store indoors in a place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
To Next Page
Loading...
Need help?
General
